Anti-Skate Half Orb
  • Anti-Skate Half Orb
  • Anti-Skate Half Orb
  • Anti-Skate Half Orb
  • Anti-Skate Half Orb
  • Anti-Skate Half Orb
  • Anti-Skate Half Orb
  • Anti-Skate Half Orb

Anti-Skate Half Orb

Code: ST2-30.316.S

Standard sizes shown below

Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This item has been added to your enquiry...
  • Continue Shopping
  • Checkout

Standard sizes shown below

Anti-Skate Half Orb

Stainless Steel

Grade 316 - Satin Finish

1no 8mm Threaded Bar Fixing x 70mm (L)

 

 

Product Code:

ST2-30.316.S - 30mm Ø x 15mm (H)

 

Logic Street & Park Furniture

sales@logic-sf.co.uk 

P: 01642 373400

 

 


Applying to Concrete / Stone Surface
Drill the surface of the bench / curb / wall.
Remove any loose dust or debris from the hole or surrounding area.
Place epoxy resin into the hole, followed by the Anti-skate orb.
Let the epoxy resin to cure for a solid finish. (up to 5 hours)

Applying to a Timber Bench / Seat Lats
Drill through the desired area of timber
Place the Anti-skate finger in the hole and tighten the nut sufficiently not to damage the timber.

Option: Snap off nuts can be provided so the bolt cant be loosened.
Note: Timber is a natural product and swells and contracts with weather conditions.

'); -->
View Downloads
Product Card